← back to pin list

STANDING REMINDERS -- Aristide's open questions + Lathrup testing (Jordan, 2026-10-11)

kerfmaster pin list · The spec — what we build to

intentWhat we want to build. Never claimed the present, so it cannot be stale — and must never be read as a description of the code.

Content last changed 2026-11-17 — computed from the item itself, not typed.

2026-11-03 OPEN (question, Jordan screenshot 'does this look like the slot rule?'): two long narrow cutouts with flared/notched ends (10 vertical, 11 horizontal) pierce mid-length with a diagonal lead to a side wall -- the O79 slot rule did NOT fire: emit._slot_ends only accepts round-ended (obround) slots, area within 8% of the obround; flared/square ends fall to the normal start. Asked whether to widen 'slot' to any long narrow cutout (by aspect + width), pierce on the centreline near one end, lead along the length. Nothing built. 2026-11-03 Jordan RULINGS (square lead-in bias): 1 square lead beats the lower-right bias; 2 outers too; 3 square at full length wins where possible; 4 slot = long and narrow, length >= 1.5x width, any end shape (starting point, try it); 5 measure first. MEASURED (scratch /home/cloudally/devtest/sq/meas.py + sum.py, read-only, 97 recent dev jobs, 1242 features; approximate: spots sampled every 0.01in, 0.03in kept off corners, tab and bias ignored): already square + full length 306 (240 inside, 66 outer); square + full length possible at no clear-air loss 313 (283 inside, 30 outer) -- includes Jordan's 0.149x0.549 flared slots on 26498269-fixture part 1 (today 65 deg off square, clear 0.0616; square from the end 0.0617); square possible but loses clear air 517 inside (median 0.018in, 329 lose >= 0.010, worst 0.179; 290 of them are already within 10 deg of square); no square full-length spot at all 106 inside (holes under ~0.4in). Every outer can go square. Open: does square win even when it costs clear air, and does within-a-few-degrees count as square. Nothing built. 2026-11-03 CORRECTION + Jordan's rule: 399 of the 517 'square costs clear air' cases were my test forcing the full 0.150 length (today those leads are shorter so the pierce sits mid-hole); a square shorter lead keeps the clear air. Jordan: 'in the case of slots, going down the length wins. In all scenarios, favoring square lead, full length, but also maintain max clear air as in the case of small holes where full length is not possible.' Read back as ranking: slots (L >= 1.5W, any end) down the length on the centreline; else 1 most clear air (capped at the standoff, near-ties count equal), 2 square to the wall (within a few deg), 3 full length, 4 lower-right; angled only where no square lead reaches the best clear air. Awaiting his confirm + go.